Edan Interpretive 6 Ch. ECG EKG Machine SE-601A

Edan Interpretive 6 Ch. ECG EKG Machine SE-601A

Six-channel ECG SE-601 series: SE-601A, SE-601B, SE-601C, cost-effective solutions including hospital wards, routine check, home visit and emergency cases.

Features:

• FDA Approved
• Heart rate variability (HRV) & R to R Trending analysis
• Portable, lightweight design
• Easy data input and operation
• Alphanumeric keyboard and one-touch operation
• Built-in rechargeable battery, AC/DC power supply
• Pacemaker detection which meet the requirements of ANSI/AAMI EC11
• Automatic analysis and diagnostic software for adults and pediatrics
• Two-step exercise test with periodic recording
• Internal thermal printer and external printer
• Support external archiving: USB flash disk, card reader
• Data transmission to PC via Ethernet or serial port

Technical Specifications:

Input Circuit: Defibrillator protection
Lead: Standard 12 leads
Acquisition Mode: 12 channel simultaneous acquisition (10-24s adjustable)
A/D Converter: 24 bits
Sampling rate: 1000Hz/channel, 10,000HZ for pacemaker detection
Noise Level: ±5mVp-p
Time Constant: >3.2s
Frequency Response: 0.05Hz - 150Hz
Calibration Voltage: 1mV±2%
Sensitivity: 2.5, 5, 10, 20, 10/5, AGC (mm/mV)
Input Impedance: >50MΩ
Input Circuit Current: <10μA
Noise Level: <12.5μVp-p
Patient Leakage Current: <10μVp-p (220V-240V)
Patient Auxiliary Current: <0.1μA (DC)
Filter:
EMG Filter: 25Hz/35Hz/45Hz/OFF
Anti-baseline drift: 0.05/0.15/0.25/0.5Hz
Low-pass Filter: 75Hz/100Hz/150Hz
AC Filter: 50Hz/60Hz
CMRR: >115dB
Recording Mode: Auto/Manual/Rhythm
Rhythm lead: Single channel or three channels selectable
Power Supply:
AC: 100-240V, 50/60Hz
12V Vehicle-Carried Inverter
Li-on battery
Battery: Built-in rechargeable Li-on battery, 2200mAh, 14.8V for 6 hours general use or 280 copies ECGs continuous printing
Recorder: Thermal printer
Record Paper: 110mm x 140mm x 144p (Z-fold)
Paper Speed: 5mm/s, 6.25mm/s, 10mm/s, 12.5mm/s, 25mm/s, 50mm/s (±3%)
Weight: Approx. 3kg (including battery and paper)
Dimension: 322mm x 310mm x 101mm
Display:
3.5 inch STN LCD, 192x64 dots (SE-601A)
5.7 inch STN LCD, 320x240 dots (SE-601B)
5.7 inch TFT color LCD, 640x480 dots (SE-601C)
External Input/Output:
Input: > 100kΩ ; Sensitivity 10mm/V ±5%
Output: < 100Ω ; Sensitivity 1V/mV ±5%
Communication Interface: Ethernet, RS232

What does it come with?

• Edan SE601A ECG
• ECG Cable (4mm, banana connector, AHA) 01.57.471017
• Bio ProTech Resting Tab Electrodes
• Unomedical 10-Lead Universal Clips
• Recording Paper (Z-fold, 110mm*140mm*144P)
• Power Cord (USA Hospital Grade)
• Rechargeable Lithium Battery (2200mAH) M21R-064114
• Fuse (T400mA, USA standard)
• User Manual
• Quick Reference Card